Up for sell a Carver Boat that I was rebuilding It came from Florida and was on land and a boat fell into it . I purchase it after looking for over 5 yearsa Carver 28 ft wide body as it has 12.5 beam and sleep six with closed off mast state room. I have fixed all the bottom all the hole blisters and the sides it still has some small things to fix and I will try to do them. It needs some sanding and buffing to look like new. I have two new 5.0 350 engines done for it with all new parts not rebuilt parts give you idea new carburetors, new water pumps fresh and engine water pump as it has closed cooling with new heat exchanger, pulleys harmonic balancer, alternators, distributors, are all new not rebuilt. Starters are new, new enginewires harness, engine mounts some new and some still good and the tool to adjust them with. I have all new gauges installedspeakers and clarion cdradio GPs with antenna and mount, and tv antenna,ship to shore radio and two antennas all new large compass. I have two remote spot lights with remote and 5 air horn setwith largecompressor new, newmarine stereo for the fly bridge not installed yet with speakers and a surround sound set for tv. Has stoverefrigerator, Ice maker, A/C with heat and a complete extra unit asIwas going to install one on the fly bridgeand it has newcontrols. It has bumpers and holder all go with it and ropes and anchor with chain ss and ss anchor with wind less that has foot control and dash controls and fishing rod holders and storage rack. The upper deck has had all of the foam and vinal interior replaced. The complete exhaust manifolds elbows gasket to make it a closed system are all new and has mufflers. Has aKohlorHonda generator asthe Honda is the best and I had it gone thru and new water pump installed. I have to complete rebuilt velvet drive transmissions with all new inside clutches seals and spring steels and even pump and bearings andnew flex plates. TheV drive was gone thru and I have a extra one redone as well. New pumps and macerator pump and water bilge pumps have been replaced also. I have hoses and belts and so many other item that will all go with it. I was going to take this boatand do the great round Ohio river to Mississippi toNew Orleans and go left to the east and head to Ney York and back in the Great lakes but my health but a big hold on the as I no longer can do it. I have done many boats as I had a boat before I could drive a car. I did a 1966 aluminum Marinette from a bare hull to a finish and got a good offer so I sold it. I go all they way or just don't do it. I have atri-axel trailer I hauled it from Florida to Indiana with the boat on it it will need some work on the wood. I have over 42k in this boat as I went with the best and the new owner will get any and all the items for it as I even have the old engines. The room in this boat with the wide beam make it a classy cabin and a large bathroom or head. The private state room has good storage and plenty room for two and even a tv as I have a setof surround spearkers for it. I know I'm leaving a lot as I have done so much and I didn't go the cheap way out as the man who did my engines and balanced blue printed was the best around here ashe did a lot of race car engines also he passed away a few years ago in a accident and we miss him. This boat when finished well be just like new and with the best part you can buy installed. It has two 75 gal gas tanks that have cleaner and staybill and a somerace fuel that will need to pump out. It has all the tank switches to switch tanks and I also have two new sending units for it as I was just going to start of new as every thing else is new.Lots of other photos avaliable on request! classifieds board limits us to 24 pictures!
Carver Boats
Price:
$16,500
Boat location:
Richmond, Indiana, United States
Ships to:
United States
Year:
1991
Make:
Raiting:
Add new question to the seller