ULTRA CUSTOM BOATS FORMULA 19

Untitled Document

Here is an absolute stunning jet boat, manufactured by Ultra Custom Boats, made in California. This is the Formula 19 model. Ultra Custom Boats is by far in the Top Three jet boat manufactures, which still today they are building boats for custom orders. Brand new this boat was $40,000.00, depending on options. This hull is a 1993, which was completely "re-rigged" in January 2014. The Formula 19 is one great riding jet boat. We have owned 6 of these models and is always a pleasure to drive. It has a shallow V-design, still allowing to cut the chop nicely in rougher water conditions.

HULL:

The gel coat colors are definitely a head turner. The main color teal, has a slight fade in certain light, and the white with a few shades of grey, gives it a very modern impression. The gel is in showroom condition, with NO oxidation or checking on deck, which you see with many of these hulls after the years with the change of climates. It has been professionally wet sanded with many steps of sanding grit, then buffed, polished and waxed. There are a few little spots on deck, that can barely be seen in photos. Your eyes have to be about a foot right on top of it to see it, however it still doesn't equate to how gorgeous this finish reflects. There are no dings or dents or other fiberglass imperfections to speak of on the deck. The sides of the hull is perfect, along with the back transom. As well with under the bow as you can see from pictures are stellar as well.The rub is straight all around and was re-revited to hull. The plexi-glass windshield is perfect as well, with no cracks and was installed using new hardware.This jet also has a ski hook, for days with the family for some skiing or tubing.

INTERIOR:

The interior was completely re-done. The upholstery was done one year ago with new wood and foam($2500). The grey and teal looks very sharp, compared to a basic white interior. Has only one blemmish on top of passenger seat.New hardware was used to fasten seats to stringers, as well the driver and passenger seats are fastened to side fiberglass in the interior.The whole interior was re-done 2014. Brand new marine grade carpet installed ($750). The stringers were done in three coats of gel-coat($700), not paint!. Everything was powder coated silver metallic, which looks amazing in the sun, complements the colors of rest of boat perfect. All gauges are freshly installed, all new Hardin Marine gauges with matching angled powder coated silver metallic bezels($425). Brand new steering stystem with matching powder coated steering bezel and adapter. Brand new white steering wheel ($125). Brand new stereo, head unit and 6x9 speakers ($300). Matching powder coated handle for passenger ($60). Brand new forward/reverse shifter, powder coated to match($95). The hot foot is brand new, powder coated to match ($150). Brand new stringer mounted place diverter, powder coated to match ($670). The bilge and lights switch is new and powder coated to match ($80). Brand new key ignition with match powder coated bezel ($60). Overall seating behind the wheel in the interior is like day one. You don't even want to sit in it, it is that nice. Everything works as it should. The Formula 19 is very spacious sitting behind the wheel, compared to most smaller hulls. Very roomy with plenty of leg room. Also comes with original bimini top to hang out in the middle of the lake, if you want to get out of the sun.

Engine:

The Formula 19 is powered by a Big Block Chevy 454. Has a total of 20 hours run time on it($2600). The motor is very strong with even compression and sounds great! Turn key! To start the boat, you click the key ignition once and use the push bottom to fire it up! Check out video below for demonstration. You will hear it sounds very impressive. The motor was stripped to bare metal and painted with silver high-temp engine paint. The Glenwood water logs/headers were powder coated($180) in the same silver metallic throughout. Brand new header gaskets. Brand new Offenhauser Chevy Heartbeat valve covers were completely powder coated($300). Brand new valve cover gaskets. Polished intake manifold with chrome allen bolts. Brand new water inlets were powder coated($90). Brand new starter was powder coated silver to match($160). Brand New alternator was powder coated to match ($125). Alternator brackets are powder coated. Motor mounts and bell housing is powder coated, along with stringer washers.($120). Holley carb, with msd coil. Scoop is new and powder coated silver with the 3 circles powder coated charcoal metallic to match boat($150). All water plumbing is done in brand new earls fittings with stainless braided line as pictured ($470). Brand new fuel lines with two fuel filters coming off each tank. Each gas tank was properly cleaned. Holley electronic fuel pump. Switch on dash, controls which side of tank the engines takes from. New hardware everywhere! Over ($400) cost in hardware. Chrome allen bolts hold on bell housing. brand new spark plugs with spark plug wires ($90). Engine area and transom is gel coated in teal like stringers in the interior. All cables and plumbing is mounted nicely to the stringers, so nothing is sitting in the bilge area. Brand new throttle cable($70). Optima yellow top deep cycle battery ($225). Custom stringer mounted billet offshore battery box, powder coated silver to match, with matching powder coated stringer washers($180). Brand new circuit board ($60). Moroso 10qt oil pan ($300). Fresh 40 wt oil with a bottle of zinc. All wires are loomed against transom very neat. This is a turn key operation.

Jet Pump:

The pump is a Dominator 12S. Completely rebuilt with 0 hours on it($1400). Brand new everything as pictured. "A" size impellar. Brand new hardware throughout. Everything was fastened with loctite. Brand New cables, steering, forward/reverse and diverter. Has a high-performance loader scoop in the intake. A loader scoop will give you more thrust, a couple mphs and higher rooster tail. All parts were powder coated in silver to match($300). Stud kit was used for the bowl, along with a two degree wedge for a little lift in the hull. We use 5200 around transom piece and bowl for NO leaks! Everything is top notch.

Trailer:

The trailer is an original Hensley brand, which Ultra Custom used with all of their boats. Original paint in great condition with original matching pinstripes to the hull colors. Bunks are in great condition. Brand new tires($500). Bearings were all redone as well. All lights work. Ready for the highway.

>

img src="http://www.finerwatches.com/boats/summerultraa000.JPG

We encourage you to come out, to deliver the boat inperson and meet you. However, we understand time is of the essense and depending where you are located, traveling can't be justified. We have shipped over 20 boats throughout the nation. We have as well scheduled a few shipments overseas, all with a positive end results. We do our best with pictures and videos to give full detail the best we can. We our confident and have the knowledge in the marine industry. We also encourage you to call with all questions you may have. If you decide to have us schedule a shipment to your destination, let us know. We have fully insured logistic companies that we have a relation with over the years for all of our past clients. As a result, we get really good qoutes anywhere. It is way under the going rate. We will also shrink wrap the boat to protect it on the road to you(Look at pictures below of a boat before we transported with shrink wrap).Everything is first class. The driver will have your information to update you on the road, along with us. Payment would be a wiretransfer. We will overnight you titles of both, boat and trailer to a convienet address of your choice, once payment is received. We will also spend time with you over the phone once you receive your new Jet Boat, to get you familiar on operation, making your first tip to the lake or river an experience.