Sanger Gull-Wing

For sale is this restored 1972 Sanger Gull-Wing wood-deck flat-bottom circle racer. Powered by a 454 LS-7 crate motor. When this Sanger was found over 15 years ago it went through a 100% rotisserie restoration. Everything on this boat is new, we never put it in the water. The motor was only fired up for 30 seconds once it was complete. At the time we already had a Litchfield for our family ski boat so we had the Sanger for show, not use. Now we are ready to let it go to a new home. The first thing we did was send it to wood aficionado Harlan Orrin for a complete restoration. He performed the Sanger's restorative deck surgery, replacing the original with an all-new mahogany cut that is breathtaking. Took it down to bare glass for a complete restoration. Swede "the painter" from Orange County followed up with the astounding black base, lit up with tangerine, pink, and aqua. Then we turned it over to the legendary K flat-bottom champion Bolton to get it right. He oversaw or performed every facet of the restoration, including the installation, and assembly and buildup of the 454 LS-7 crate motor. The late Ron Bolton was known as a fierce track competitor in the volatile blown flat-bottom ranks and had a performance shop in Lake Elsinore, California, Bolt-On Performance. The engine features a set of blueprinted 660 carbs, tunnel ram, over-sizedoil pan, stainless fittings, braided lines, and custom stainless over the transom exhaust. It features a custom painted tandem axletrailer with billet aluminum throughout. It also has a custom made boat cover that required the boat to be at this shop for a custom perfect fit. This Sanger was featured in "Hot Boat" magazine May 2004. Every boat needs a name so after all was said and done, we took it to Billy B's Kustom Paint to finish it off with a name, "Black-Woodo" I have a lot more pictures if you want them. Please call phone Susie