Ranger Tugs R-25

Recent complete top to bottom cut-wax and polish. looks brand new!It needed a few of things addressed such as-the bow thruster- generator / engine issues.Ive replaced the bow thruster motor and installed a new ECM right from mercruiser ($2,800) i opted for the higher 170 HP ECU not the original 150 (there is absolutely no difference mechanically, just a higher HP tune)so currently as it sits the generator doesn't crank over just clicks and occasionally will roll the motor over a little bit... haven't really looked into it very far but im going to assume it needs a starter.The engine needs the fuel system replaced ( hi pressure fuel pump and injectors) which i have and will go with the boat.i upgraded the original smart craft display with a new garmin 7" unit with the smart craft NMEA 2000 gateway. works flawlessly.as for the trailer all of the bearings were just replaced along with new load range F HD tires along with load range E spare and is ready to roll down the road.I've teak oiled everything once inside but could use another coatthe forward birth teak and holly floor needs attention as a gallon of spring water broke open and sat for probably a week and delaminated the teak. i do have veneerer replacement to go in i just haven't cut it to size yet.My number is (315) 955- four - five - zero- eight