Peterson YP Or USN COOP Mine

Please call me to discuss the boat before bidding. We know you will want lots more info than what is here as well as inspections or surveys. I do not text well (arthritis)so a phone call is the best way. phone is my office number. It is forwarded to my cell when I am out, but does not forward texts. Email is good also. I am also going to include the PassageMaker article about this boat in the links. Live aboard with tons of room. Start a new B&B. Take the Ferry to

work or BART, No lawn, No worries, No property tax. Ok, life is not that perfect but you

get the idea. If we still lived in San Jose, this is what we would do in

a heartbeat. We bought the boat to become "loopers".

Sadly we can not retire this way. ex YP668 exCT2This is an 80' NAVY YP. Probably 654 Class, but we think its one later. If you google this you will find more information than can be posted here. Will make a great passage maker ("great loop") boat, club dive boat, training or work boat. Currently in Tarpon Springs, FL. Would be great in the islands, CUBA bound or anything else you can dream of.We have over 1 gb of photos of all the work since we purchased the boat.

Everything we did is photo documented in the slideshow and PDFs links below.All work photos, manuals, Navy drawings and documents are to the right. CLICK HERE for Slideshows and Pdfs. We can finish the boat to your specification at a reasonable price here in Tarpon

Springs FL. Call me to discuss it. Two, brand new 4 valve mil 12-71s (330hp) motors were installed

in 1994 while in "special" duty at the NAVY sub base in Groton, CT. These are far more robust than the later 12V-71s and they have Allison gears which are failsafe. We purchased the boat in

Boston and brought her down (outside) in 2006. The two engines outboard

are at about 1400+ hrs and the two inboard ones 1100+. Feb 2008 we

hauled her and spent the next 7 months working on her bottom. The boat

is double planked with VG Alaskan Yellow Cedar (one of the worlds most durable wood) about 2 inches thick, with the exception of the

Garboard, Broad and Shear planks which are VG white Oak. Frames are also white oak on 12 inch centers. We wooded the

boat and reefed all the seams. Then proceeded to replace a few thousand

fasteners. We splined the keel to the garboard and the garboard to the

broad with VG fir and SMITHS "all-wood" epoxy. The hull was allowed to dry out

for months and then about 40 gallons of SMITHS "CPES" applied. All seams

and fastener countersinks were then payed with 3m 5200. Then 30 gallons

Sherwin Williams Corothane Mio Aluminum Polyurethane. Plus 30 gallons

Sherwin Williams Corothane Coal Tar Polyurethane on top of that. And

Finally 20 Gallons Sherwin Williams Seaguard ablative bottom paint. The

worm-shoe was replaced with a 1" thick plate of Starboard which was

bonded to sheets of micarta and then bed in 3m 5200. The keel is a 17

layer white oak laminate. We lifted the boat off of the marine rail with

a single 50 ton jack to install the worm-shoe. Now with the boat only

being supported at two points 60 feet apart we checked every door and

hatch and there was no binding anywhere. This boat is built like a tank. At 67 tons, she was designed to be lifted with only two straps.

We R&R'd every valve and sea-cock as well as installing new monel grease

zirks in the sea-cocks. We went into the fuel tanks and cleaned spotless

while installing ports for a fuel polishing system. The tanks were and

are like new inside with the original beautiful hard epoxy finish. The

freshwater tank is Monel as is the black tank. She is copper clad for

light Ice along the waterline and wrapped under the counter at the

stern. This also takes the abuse of floating debris. This boat can be an enormous project for the faint of heart or

minimally, put her straight to work. The shipyard the boat is in builds two to three 300 ton commercial fishing vessels a year and has done so for

more than 30 years. Any work I can not personally do can be had from the

yard at a lower rate than almost anywhere on the eastern seaboard. We

have all the original blueprints and manuals. There were about 25 of this class boat

built for training the midshipman at Annapolis how to run a ship. Then, when women came

into the school and they had to build larger boats and the 108 series begin.

The slideshow link below is how we purchased the boat from the Boston Police. The batteries by the way are C&D telco grade AGMs with about 90% life remaining. 30KW DELCO Gen-set. 3 phase, 120 volt DELTA, coupled to a 2-71HV prime

mover. Comes with installed switchboard, spare head and parts. There is a watermaker and air conditioning. etc, etc. GYRO?

2006 photos belowhttp://www.themidmorningwatch.com/yp/slideshow/index.htmlGive me a call if you want to talk further. We bought the boat to become "loopers". Sadly we can not retire this way.

Billphone yp668 (at) verizon.net We do have a couple of other interesting things in our classifieds board store. Never boring normal stuff. I mean really, who has a nuclear fuel rod grapple new in the box? Or an ORIS Aviator? Or a Flaminia Zagato SuperSport? HP network annalyzer etc. Castro Convertible has nothing to do with CUBA.