Mariah MX 19

I purchased the boat in 2007 from a Marina in Iowa with the understanding that the floor was rotten and would need to be replaced. When I got the boat home, I found a freeze plug in the bilge and subsequently discovered the block was cracked from freeze damage. I have since replaced the floor with 3/4" plywood and have re-carpeted it, but the carpet needs to be glued in. The interior panels need to be re-installed and some may need new marine vinyl. All of the seats need new marine vinyl, and the back bench will need some new plywood due to rot; but everything is present and can be used to make templates. The engine was pulled and a used block was installed, but needs to wired, and have the distributor and all accessories installed. I have the starter, alternator, and all engine accessories and the original crack block if wanted for a core. No battery is included. There is a large area of discolored gel-coat on the front port side under the registration numbers approximately 4' by 4'. The boat was registered in AZ thru 2010, but has never been in water. Boat has been stored under cover in my back yard in Tempe since I brought it home 8 years ago. The trailer is a 1991 Heritage steel channel single axle bunk trailer with 2 brand new tires on it. The lights are present, but the wiring will need to be redone before you trailer it too far. Free and clear title on trailer, AZ registration for boat is ready for transfer. I have been distracted with other projects and this will never get finished by me, so it's time to let it go. Item will sell to highest bidder regardless of price. I will not separate or take offers outside of classifieds board, or end the auction early. I may be able to deliver for cost.