Magnum Maurader

-1968 Magnum 16 Maltese with Trailer -

MAGNUM MALTESE MURADER 16 FT

RARE DON ARONOW POWER BOAT

phone questions Hull Only (no motor or controls) Trailer INCLUDED

**Hard work is done **Hull - Floor - and Transom Restored

nice paint job base clear coat

• If you want a good start this is it all the hard work is DONE

  ! Classic MAGNUM that just went through a complete hull and deck restoration

• We removed the floor and transom, fabricated an

  inch and half marine ply sandwich with resin and glass.

• Professionally

  installed transom, cleaned up and re-glassed stringers.

• Built rock solid,

  installed marine ply floor, encapsulated in resin on both sides and all edges.

• Stainless screws secured to stringers.

• Professionally fiber-glassed floor edges

  to hull sides like factory completely redone top deck, urethane base clear

  coat.

• hull was sanded and prepped base clear factory colors
• gas

  vent needs rub rail- dash seats and engine hull and top deck ready to go ready

  for rigging

• The perfect shore boat for your MAGNUM 100'. According to MAGNUM

  MARINE, Don Aronow made two smaller outboard engine powered boat designs.

• One

  was a ski boat, the 16 Marauder. He made about 20 copies of this deep v 50

  MPH boat design. ( this is the one in the add ) ( PICTURES included of

  original add ) so you can see what boat looks like when done -

****************************************

• we used all the correct materials resins and

  15 yards Matt was used

• to

  install the transom & floor ( the Floor is 3/4 inch marine ply ) The

  transom is

• 3/4 marine Ply x2 glued and screwed to make 1&1/2 inches thick ...
• The transom deck and floor were sealed with resin on all sides the floor is

  screwed with stainless marine screws with resin on each hole ( totally sealed )

  you will see a stainless transom plate that is included ( if you want to use )

  dont really need it because the transom is like a mack truck

• We removed the floor and transom, fabricated an inch and half marine ply

  sandwich with resin and glass. Professionally installed transom, cleaned up and

  re-glassed stringers.

• Reinforced the ~top deck and Dash area

• professionally fiber-glassed floor edges to hull sides like factory completely

  redone top deck, urethane base clear coat. Black and White ! Ready for Rigging

  150hp Tower of Power outboard

• This is a rare Boat Built on Thunder boat Row by Magnum Marine
• only 20 made

• The hard work is done
• New owner will need to Install
• Install

  new Fuel tank above the floor

• rub

  rail New steering ,Dash Gauges ~seats ...

• Then ready for power

BILL OF SALE ONLY For trailer

kEYWORDS >MAGNUM ,CIGARETTE,FORMULA,APACHE,DONZI, SCARAB,NORTECH,