Magnum Malteese Murader

1968 Malteese Magnum Murader 16' V Hull for sale in Florida - United States .

RARE 1968 SOLID Maltese Magnum Marauder 16' Fresh Restore Refinished original White and Black Hull & Trailer INCLUDED new paint ,tires, rims, lights and jack on trailer

all the hard work is DONE ! See pictures Please read Classic MAGNUM that just went through a complete hull and deck restoration by a veteran restoration shop. You will see the pictures from start to finish

75 man hours was put into the restoration plus $1000 in marine ply , resin , mat, and urethane paint

we used all the correct materials resins and 15 yards of Matt

to install the transom & floor ( the Floor is 3/4 inch marine ply ) The transom is 3/4 marine Ply x2 glued and screwed to make 1&1/2 inches thick ...

The transom deck and floor were sealed with resin on all sides the floor is screwed with stainless marine screws with resin on each hole ( totally sealed ) you will see a stainless transom plate that is included ( if you want to use ) dont really need it because the transom is like a mack truck

We removed the floor and transom, fabricated an inch and half marine ply sandwich with resin and glass.

Professionally installed transom, cleaned up and re-glassed stringers. Rock solid Reinforced the ~top deck and Dash area ready for your new gauges

( I left the original holes ) so a quick router and your new install will be complete professionally fiber-glassed floor edges to hull sides like factory completely redone top deck, urethane base clear coat. Black and White ! Ready for Rigging 150hp Tower of Power outboard This is a rare Boat Built on Thunder boat Row by Magnum Marine only approx 20 made The hard work is done New owner will need to Install cleats ,Install new Fuel tank above the floor

fasten top deck with 3m 8200 and stainless screws ~rub rail New steering ,Dash Gauges ~seats ...Then ready for power

Realistically ( about 40 hours to complete )

If your looking for turn key ( this is not the boat for you )

If your looking for a clean project to finish with the dirty work complete ( this is your boat )

please do not bid if you have questions ( ask and I will answer them )

when you bid that means you are ready to purchase

I try to make it clear on these projects so there is no story's

I explain what I have done and what you need to do to finish

this boat came with a Merc Tower of Power in line six ( they are a bullet proof motor )

usually can find them for $600-$1000

Boat needs aprox 2000-3000$ to finish with motor/steering tanks and seats

see the brochure pictures Very cool project and you will be the only one at the lake with this boat a true collectors item these and the Donzi 16s sold for 2-3 grand more than a new corvette back in the day !!Happy bidding and hit me up if you have questions thanks for looking

Title in hand FOR boat BILL OF SALE ONLY For trailer I have many projects under way this needs to go to a collector or someone that wants one of the best

handling v hulls in its class ~The Magnum 16 is the Best Handling V hull in its Class "awesome Boatsee Videos This is a rare boat see these other 16 Magnums http://www.youtube.com/watch?v=2lXRjqYWJ60 http://www.youtube.com/watch?v=6FuQYKNkEnQ tex OR CALL to show contact info any questions KEYWORDS >MAGNUM ,CIGARETTE,FORMULA,APACHE,DONZI, SCARAB,NORTECH, V HULL ,race boat