Chris Craft Holiday

Name: Chris Craft Holiday
Brand: Chris Craft
SKU: 145809
Price: 29900.00 USD
Availability: InStock

Price:

$29,900

Boat location:

Mishawaka, Indiana, United States

Ships to:

United States

Year:

1955

Make:

Chris Craft

Model:

Holiday

Type:

Runabout

Hull Material:

Wood

Trailer:

Included

Use:

Fresh Water

Engine Type:

INBOARD

Engine Make:

Chris Craft

Engine Model:

KLC 120 H.P.

Primary Fuel Type:

Gas

For Sale By:

Private Seller

Fuel Capacity:

11 - 20 Gallons

Hull ID Number:

H18074

Length:

18.0 feet

Beam:

6.0 feet

Raiting:

Condition:

Used

Seller Notes:

It has been renovated with the finest materials & hardware available. We started by stripping the hull bare, replacing damaged pieces on the frame with White Oak. All wood on the frame was sealed with 2-part penetrating epoxy (inside and out). The bottom of the boat is fiberglass over Mahogany wood & marine plywood. The Mahogany is all new wood secured with bronze & stainless screws! We have applied 11 coats of high gloss Spar varnish on all Mahogany, we also applied 4 coats of bronze bottom paint on the hull, and applied 2 coats of gray oil base paint to the hull interior.We had many of the metal parts re-chromed.The 6volt DC electrical system has been completely refurbished The motor is an original Chris Craft Model KLC 120hp 6-cylinder inboard that was completely rebuilt by a professional mechanic. All new internal parts and 6-volt electronic ignition was added. The original 6-volt generator and the starter has been rebuilt.The heavy-duty trailer has new tires and wheels.

Description:

Restored 1955 Chris Craft Holiday

If you grew up with wood Chris Crafts you will appreciate this lovely 1955 Chris Craft Holiday.

This boat was built at the Chris Craft plant in Cadillac, Michigan in early 1955 and shipped to a dealer in St. Clair Shores, Michigan.

All paper work for this boat is available including the original bill of sale (showing that the Serial Numbers of the Boat and Motor match from the Factory) along with a set of plans that were used to restore this boat including manuals for the engine, transmission, and carburetor.

It had been setting in a neighbor's backyard for a few years, and before it was too late we intervened.

Over the last 4 years it has been completely and painstakingly renovated with expert craftsmanship and the finest materials and hardware available. We started the lengthy process to renovate, (It took us 4 years, approximately 2500 Hours) stripping the hull bare, replacing damaged pieces on the frame with White Oak. All wood on the frame was sealed with 2-part penetrating epoxy (inside and out). The bottom of the boat is fiberglass over Mahogany wood and marine plywood.The Mahogany is all new wood secured with bronze and stainless screws! The boat is extremely stable.

We have applied 11 coats of high gloss Spar varnish on all Mahogany, we also applied 4 coats of bronze bottom paint on the hull, and applied 2 coats of gray oil base paint to the hull interior.

We had many of the metal parts re-chromed.

The 6volt DC electrical system has been completely refurbished

The motor is an original Chris Craft Model KLC 120hp Flat Head 6-cylinder inboard. The motor was completely rebuilt by a professional mechanic. All new internal parts and 6-volt electronic ignition was added. The original 6-volt generator and the starter has been rebuilt. The heavy-duty trailer has new tires and wheels.

Here is a wonderful little piece of the past for only $29,900.00

We have before and after photos available.

Contact Dale Nelson at email or call at phone if you have any questions.