READY FOR WATER. NO PROBLEMS. DROP IN TODAY AND RIDE!
I have a ton more pictures so if interested just ask.
Thank you for looking at my restored 1998 Bayliner Sunbridge Ciera 2155 w/HD trailer. This is not a stock rinky dinky Bayliner Cruiser with an inboard engine, outdrive sterndrive. This Bayliner has been modified and upgraded with wonderful parts and accessories as well as the trailer being beefed up as well. It's all new.
I built this from scratch. I not only rebuilt the engine but bumped up the compression and horsepower too from 235hp to a whopping 310hp+. It's got custom interior, new floor carpeting and many other extras. I am a certified master mechanic and own and operate my own automotive performance shop for over 11 years so everything has been done right. I don't want to get rid of it but we have no choice right now.
I have had it out already in the Spa Creek, West River, Severn River and Parish Creek. It only has 5 runs so far on the fresh build and about 14 hours total so far. It's all ready to go with no problems whatsoever so just drop it in the water and enjoy.
::::IMPORTANT::::
This boat has NEVER been in salt water since its rebuild so the mechanical and integrity of the boat is 100%. There is absolutely NO need for any concern for corrosion or salt damage as everything is new and it's NEVER been in salt water. I can also prove it as well. I have a borescope and I am willing to scope the engine if you so desire.
I am willing to take it out and show you it works on the water but I will only do so for $300. This is non-negotiable. I have full confidence and faith in the boat. It's built correctly and I take my wife and 5 children out on it with zero concern.
I have an obscene amount of money into this boat and you need not to do anything to it. Just drop it in and go. Even the trailer was modified to be stronger and 90% of the trailer was not only beefed up but I used thicker gauged steel, I used thicker sheets and double tig bead overlapped with mig bead on all the welds for added strength.
Nada book value is $22,500 so bid accordingly. If your broke or cheap then don't bother because I'm not going to give my boat away. I'm not desperate and I'm not stupid. You won't get a steal on my dime but I am being extremely fair in my asking price. If you look at other boats they don't compare to mine. I have full documentation of everything so you can be sure it's all done. Other boats and boat sellers will feedbyou a bunch of garbage trying to sell their boat even at the risk of lying to you while their boat is trashed. Mine is mechanically perfect and there's nothing to hide because it's all new.
The seats are new, the engine is new and upgraded, most of the mechanical components have been modified and customized and also has a new sterndrive while I was at it. Again I have every receipt and documentation. It has brand new carpeting inside and a custom fabricated sound system complete with a subwoofer system and multi-amplifier setup. So below is what has been done. ALL parts are brand new. With some minor cosmetic things this boat is perfect and reliable.
I have many many more pictures and information and receipts for everything as well.
ENGINE:
1.) Chevy 5.7 engine block
a.) Acid dipped block
b.) Bored & triple honed cylinders
c.) Passages opened
d.) De-sanded & De-burred
e.) Marine freeze plugs
f.) Block painted w/marine paint
g.) New brass block drains
h.) Milled deck w/deck plates for bore & hone
2.) Sealed Power .030 flat top hypereutectic pistons
3.) TotalSeal Mahle ring set
4.) King main & rod bearings
5.) SCAT forged rods (floating)
a.) ARP 2000 bolts
6.) Eagle forged crankshaft
7.) Edlebrock double roller timing chain
8.) New Melrose oil pump
9.) Chevy high compression heads (stock valves)
10.) Upgraded front & rear main seals
11.) Marine head gaskets
12.) Marine gasket, o-ring and seal kit
13.) CompCams valve springs
14.) CompCams pushrods
15.) CompCams hydraulic lifters
16.) High tensile head and main bolts
17.) New risers
18.) New exhaust manifolds
19.) New manifold bolts
20.) modified intake manifold
21.) Rebuilt 750cfm carburetor
22.) New hoses
23.) Modified intake setup
24.) New ATI harmonic balancer dampener w/degrees
25.) New distributor w/points
26.) New MSD Blaster 2 oil filled coil
27.) Chrome timing cover
28.) New HD exhaust rubber couplings w/clamps
29.) MSD 10mm racing plug wires
30.) Autolite platinum plugs
31.) New HD deep cycle auxiliary battery
32.) New HD Duracell primary/startup battery
33.) New 0 gauge, 4 gauge & 8 gauge power wires
34.) Modified mechanical fuel pump
35.) New SS fuel lines
36.) Brass secondary fuel filter
37.) New water pump
38.) New belts
39.) Remanufactured alternator
40.) Remanufactured steering pump
41.) Remanufactured marine starter
OTHER:
1.) Carbon Fiber marine vinyl seats (custom made)
2.) New hydraulic seals & fluid
3.) New pump
4.) New Sierra sterndrive water pump kit
5.) New Shakespeare 8' CB antenna
6.) New upgrades to steel chrome antenna hinge/
bracket
7.) Sahara S500 bilge pumps (3)
8.) Engine & engine parts and accessories were
powder-coated
9.) New electronic shift assist
10.) New speed sensor
11.) New plastic coolant pipe (sterndrive)
12.) New Driveshaft Bellow
13.) New Exhaust Bellow
14.) New trim sending switch
15.) New boat windshield glass w/frame
16.) Custom reconditioned wood interior
17.) Installed dual airhorns
18.) New HD boat anchor
19.) New 15.25 x 15 propeller
20.) New 100' 1/2" anchor rope
EXTRAS:
1.) New modified 180 gallon steel fuel tank made out
of custom 14 gauge steel
2.) Kenwood 12" SVC Subwoofer
3.) Apline competition 6.5" 3-way speakers
4.) MTX 600watt amplifier (for subwoofer)
5.) Jenson inline 40watt per channel amplifier (for
component speakers
6.) Marine 6" outdoor speaker (in custom made box)
7.) New Cuddy cabin carpet
8.) SS Sink
9.) New Porti-Potti
10.) Full sized table (2) one inside / 1 outside
11.) Humminbird 200DX depth/fish finder
12.) Refrigerator (cooler style)
13.) Step out hull landing
14.) New 25lbs. HD boat anchor
15.) New West Marine VHF 650 CB radio
16.) New 1/2" HD anchor rope 200'
17.) New Lanyard switch
18.) New wiring
19.) New fuse panel
20.) New box end
21.) New fuses
22.) New 24" HDTV (Vizio)
23.) New massive 1100watt power inverter
24.) ALL new White phantom gauges
EZ-LOADER TRAILER:
1.) New yellow wobble wheels
2.) New hog rings
3.) New wobble wheel arm
4.) Custom made, modified & upgraded wobble wheel
brace bars made out of 10 gauge steel / double
welded bead seem w/14 gauge plates (much
stronger then the garbage plastic EZ-Loader
designed it with
5.) New Smith 4" rubber wheel
6.) New white wheels
7.) New tires
8.) Waterproofed trailer coating (black)
9.) Bearing buddies installed
10.) Winch system w/chain backup
11.) New swing arm w/welded wheel assembly
12.) New 7500lbs dual wheel lift arm
THINGS TO NOTE:
1.) $120 - Water box if wanted but
not needed
2.) $35 - Cuddy window
replacement (takes about
8-10 minutes to replace)
3.) $?? - Windshield glass (broke
during a storm but not
needed)
4.) $4 - Cuddy top door hinge
(takes about 5minutes to
replace)
5.) $32 - Compass (takes 5 minutes
to replace)
6.) $?? - Rebuild Bimini curtains
7.) $10 - re-tint mini-windows (takes
about 20 minutes to do)
UPDATE: (3/2/2018)
1.) I just installed new White
phantom gauges and made a
custom carbon fiber panel to
hold all the new gauges in
2.) Just changed the sterndrive fluid
with high viscosity
3.) Just changed the fuel filter
4.) Just changed the oil and filter
5.) I just installed a high amperage
1100 watt power inverter
6.) I just installed a new HD LCD TV
7.) I just installed new header
gaskets with Mr.G's
8.) I just installed a new 5000lbs.
trailer strap
9.) I just installed a new anchor
10.) I just installed a new 100ft. 1/2"
anchor rope
11.) I just installed new locator night
time light bulbs
12.) I just installed a brand new
Evinrude 15.25 x 15 propeller
w/new center
13.) I just installed new hydraulic
fluid
14.) I just installed a new dual wheel
7500lbs trailer tongue lift is 3
timeslarger then needed but is
more then enough
UPDATE: (7/3/2017)
1.) New 24" HDTV installed (wires
are now tucked and hidden)
2.) New power antenna installed
3.) New massive high
output/wattage power inverter
4.) New 100' larger 1/2" nylon
anchor rope (went bigger then
needed)
5.) New HD anchor (went bigger
then needed)
6.) New trailer tires
7.) New white trailer wheels
***Buyer is to pay all auction fees. This is non-negotiable***
I am willing to deliver within reason for a price as well.
Add new question to the seller