Seaswirl Spyder 178

I acquired this boat three years ago and have carefully improved and maintained it. It starts easily, idles strong, and gets to 4000rpm on the water. Great for tubing. The engine model number is E150STLCEM by OMC in case you want to look it up. It is a 150 horsepower two-stroke engine and is the original engine for this boat. I have replaced the VRO oil pump with a fuel only pump so it now runs premix.The following systems all work: water pump, navigation and anchor lights, bilge pump, stereo, tachometer, voltmeter, primer solenoid, tilt/trim. Everything but the speedometer. It has a new starter (OMC) and a refurbished tilt/trim system. The fuel tank holds about 28 gallons. And, there are no less than 6 cup holders!There is new upholstery on the back bench and the captains chairs are in good shape. The cushions on the open bow are coming apart at the seams so will need some attention. The original gelcoat is fine with no evidence of damage. The trailer has some rust but has recently replace rollers and recently serviced hubs with bearing buddies. The trailer also has new lights there seems to be a loose connection somewhere. I have a shop manual.I've included pictures of the engine running on the hose in my driveway. You can see the exhaust and the coolant stream.I have the titles for the boat and the trailer. They are both registered until next summer. Title for boat is attached to this ad.The pick-up location is in the 98112 zip code. That is the Montlake neighborhood of Seattle, WA.