Howard Custom Boats 25 Bullet CBR

Excellent condition Howard 25 Bullet for sale. One of the most efficient v bottom

hulls on the west coast. Some info on motor:Gen 6 block- 461 C.I.D.

4.280 Bore / 4.0 Stroke

GM forged crank,

Manley rods- 6.135

JE forged pistons-speed pro rings

Crane hydraulic roller cam-#13750

(.587/.610 lift)

Manley pushrods

Gen 6 heads (polished chambers)

Manley valves (2.25, 1.90)

Crane springs and retainers

Crane 1.7 roller rockers

Feel pro head gaskets

7.9 to 1 compression ratio. B&M 250 Supercharger with 2 Holley 750 carbs.

Imco exhaust with stainless risers and Teague oil cooler

Boat is loaded with:

hydraulic steering to helm, Dana tabs, Dana hinges for hatch, GPS,

Bimini, snap covers for cockpit and open bow, onboard battery charger,

Halon system, built in cooler, aqua step in rear, compass, fuel and

boost pressure gauges, oil temp gauge. Two Blue to Optima batteries in pewter

Dana boxes, billet ski tow along with all the standard items from

Howard.

Stereo done by speed of sound in Havasu with Alpine digital amps, Sony

head unit with remotes at helm and transom, fosgate highs and subs.Ellis trailer with centerline billet wheels.

Very clean set up with colors and graphics that won't go out of style.This boat is incredible. It has been kept in great condition. Always stored indoors. The only reason I am selling is to buy a Howard Deck boat. I am available most weekends to show the boat in Lake Havasu. Test rides for serious buyers. If you are looking for a Howard, you will see this is priced below the market. The only defect on boat is on the rub rail (there are two scratches)From Howard's Website:25 Bullet

Designed for the performance enthusiast, the Howard 25 BULLET is the perfect blend of style and performance. Utilizing the most up to date advanced ventilated-stepped hull technology available today, the 25 BULLET delivers speed and performance as only a Howard can. Equally at home on large lakes and unprotected bodies of water, the 25 BULLET epitomizes high performance boating at its finest. We have designed an ergonomic cockpit that has more interior space, and then some, than any other boat in its class. Race designed drop out bolster seats, with built in lumbar support, hold you comfortably in place regardless of water conditions. Standard seating for six is accomplished in unparalleled comfort. An optional rear seat incorporating four individual buckets, with built-in headrests on the sundeck, is also available. Howard's innovating styling and technology allow for a full fiberglass sundeck presenting a flush molded-in modern look. This design eliminates protruding scoops from the center of the hatch, so that nothing detracts from the clean sleek styling (supercharged motors, obviously, are the exception). The spacious cabin is pure elegance. A forward vee berth, with a hidden porta-potti and storage, sleeps two. Twin facing convertible couches provide seating for four adults as well as providing additional sleeping space. Rich, crushed velour fabric adorns the cabin seats while mirrored tambour and indirect lighting complete the interior. An optional entertainment center complete with electric blender, icebox with wet bar and running water is also available. For those who truly appreciate luxurious quality and performance, there is nothing finer than the 25 BULLET.

Construction:

The HOWARD 25 BULLET is constructed using only the finest materials available. We start with full-blown 100% vinyl-ester resin and Knytex knitted Bi and Tri directional glass fabric. The entire hull is cored with 1/2" end grain Baltek Balsa and Baltek foam. The four full-length stringers are made from laminated marine grade plywood. The hull and deck are joined together with Knytex 1708 Bi-directional glass fabric. Self draining floor liner, sundeck and rear seat bases are molded one piece (Balsa cored) fiberglass. All stringers, bulkheads, floors and fuel tanks are installed while still in the mold to insure a perfect fit. Like all Howard's, the mold cure time is two weeks to insure proper curing and strength with no distortion. All hardware is grade A aircraft quality stainless steel. Howard's absolute insistence on quality and meticulous attention to detail has produced the finest performance boat available.

Performance:

Exhilarating, Fast, Stable, and Smooth Riding' One ride and you will be saying all of these things. With its ocean tested bottom the 25 BULLET is afraid of nothing. Our unique bottom design allows the 25 BULLET to run regardless of water conditions.

Specifications:

Length

25'2"

Max Beam

98"

Approximate Weight

3800 lbs

Seating

6

Approximate Fuel Capacity

65 gal

Hull Deadrise

22.5o

Transom Angle

15o

Freeboard

40"

Standard Equipment/Features:

• 100% hand laminated deck & hull with pure vinyl-ester resin and knitted Bi & Tri-directional fiberglass
• Aircraft quality stainless steel fasteners throughout
• Full Gaffrig instrumentation including dual lever shifter built into driver seat and polished Dino steering wheel
• 65 gallon fuel capacity
• S.S. Propeller
• Custom color coordinated genuine naugahyde interior with double stitched French flat seams and 40 oz plush marine carpet
• Custom gel coat design with up to 7 colors including fade
• Fiberglass floors, seat bases and engine lid with hidden hinges
• Electric hatch actuator
• Custom finished engine compartment
• Automatic bilge pump and bilge blower
• Custom interior lighting package & navigation lights
• Fusion coated billet hardware: grab handles

  w/vents, ski tow, gauge bezels, fuel fills, cleats, cup holders, battery

  box and custom switch panel with illuminated rocker switches

• Ellis tandem trailer with brakes
• Built in ski locker, ice chest & bow storage compartment
• Separate one piece mold for open bow model (not a cutout)
• 4 stainless pop-up cleats with fusion coated bezel

4.280 Bore / 4.0 Stroke

GM forged crank,

Manley rods- 6.135

JE forged pistons-speed pro rings

Crane hydraulic roller cam-#13750

(.587/.610 lift)

Manley pushrods

Gen 6 heads (polished chambers)

Manley valves (2.25, 1.90)

Crane springs and retainers

Crane 1.7 roller rockers

Feel pro head gaskets

7.9 to 1 compression ratio

Imco exhaust

Teague oil cooler

Boat is loaded with:

hydraulic steering to helm, Dana tabs, Dana hinges for hatch, GPS, Bimini, snap covers for cockpit and open bow, onboard battery charger, Halon system, built in cooler, aqua step in rear, compass, fuel and boost pressure gauges, oil temp gauge. Two Blue to Optimising pewter Dana boxes, billet ski tow along with all the standard items from Howard.

Stereo done by speed of sound in Havasu with Alpine digital amps, Sony

head unit with remotes at helm and transom, fosgate highs and subs.Ellis trailer with centerline billet wheels.

Very clean set up with colors and graphics that won't go out of style.